Details
Eliminate dropped chains forever and more than double your chainring life with the new OneUp Components Chain Guide. At only 35g the OneUp Chain Guide weighs less than a sip of water, and can save you money in less than a season.
FEATURES:
• Install without removing your crank
• Fits ISCG05
• Single tool install and adjustment (4mm hex)
• Boost compatible
• Oval Compatible
• Stainless Steel hardware (Ever notice how much rust loves ISCG bolts?)
• Includes 2 top guide pieces 1xBlack 1xGreen
• Patent Pending adjustment system
Weight: 35g
Capacity: 26-38T
Capacity: 26-38T
Chainline: 5.5mm adjustment
Mount: ISCG05
Color: Green and Black top guides Included
Material: 7075 aluminum, top guide glass reinforced thermoplastic
GUIDE SETUP INSTRUCTIONS
1. Set chainring size tighten bolt to 3Nm
2. Install backplate onto ISCG05 tabs
3. Rotate backplate until flat is horizontal and torque bolts to 5Nm
4. With crankset and chain installed, use spacer shim block to measure clearance between back plate and chain
5. Determine the corresponding number of chainline shims required
6. Assemble top guide with spacers and tighten bolt to 3Nm
2. Install backplate onto ISCG05 tabs
3. Rotate backplate until flat is horizontal and torque bolts to 5Nm
4. With crankset and chain installed, use spacer shim block to measure clearance between back plate and chain
5. Determine the corresponding number of chainline shims required
6. Assemble top guide with spacers and tighten bolt to 3Nm