Taillights

- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 6

Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.

Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.

• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body

- 8 lumen, single LED safety light - 2 modes - solid and flashing - Up to 110 hour run time with 2 CR2032 batteries (included) - Multi-fit rubber strap attachment

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

3 LED tail light The Blinky 3 is a classic cycling safety light. The iconic and durable kidney bean design has been keeping bikers visible for two decades. The 3 LEDs are super efficient and last for over 100 hours on flash mode.

Sunlite's 330 Taillight helps you be seen. It sports a 100 hour run time with a 1/2 watt 3 LED system. The housing is water resistant and it has steady and flashing modes.

- 20-lumen COB chip LED tail light - Powered by 2 AAA batteries (included) - Can be installed horizontally or vertically - IPX3 water-resistant rating

- Single super bright LED safety light - USB rechargeable - cable included - Low battery indicator - Short 2.5-3 hour charge time with indicator light - Quick and easy to use silicone band attachment - 2 modes - Steady and flash - Lumens: 8

CatEye's Omni 5 Taillight uses Omni Directional Technology for 360 degrees of visibility. Five super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 120 hours. Plus, CatEye's tool-free mount makes installation a breeze.

Fast-mounting safety light The perennially popular Spok is a commuter classic. It’s the little bicycle safety light that has a fun design that’s super functional. It straps to everything including helmets, hubs, saddle rails, and seat posts. It keeps you illuminated no matter where you strap it on.

- USB multi-purpose safety light can be used on clothes, helmets, or bikes - 360° bracket allows multiple mounting options for a variety of applications - 25 lumen output through 9 COB chip LEDs - 5 modes offer day and night uses - 4 to 6-hour runtime

7 LED tail light The Blinky 7 tail light aims seven LEDs in five different directions so you are visible from the rear and the sides as you roll along. It’s a dependable and attention-grabbing rear safety light that gets you noticed.

Put it on your seatpost, put it on your seatstays, put it anywhere, Sunlite's Griplite goes almost everywhere. This powerful little light has 4 LEDs and runs for 60 hours! It has steady and flashing modes and is housed in a water-resistant body.

• 5 LED rack mount rear light • 4 modes (1 steady 3 flashing) • Bolt-on mount for rear racks

Compact, super-lightweight USB rechargeable LED cycling taillight. Its durable co-molded construction is minimal and has an IPX7 water-resistance rating. A versatile mounting strap quickly mounts to a variety of post sizes. Five output modes offer up to 5-lumens and the custom Wide Angle Optics lens provides 270° of visibility. The Femto USB Rear can run for up to 15 hours and is easily rechargeable with the included Micro USB cable. A secure, threaded composite matrix cover keeps the USB port clean and sealed. The Femto USB is perfect for commuters and recreational riders looking for a simple and inexpensive way to add visibility. Specs - Max Lumens: 5 - Weight: 23g - Max Runtime: 15 hours - Recharge Time: 2:30

This handy clip-on light may be the most important accessory you pick up for your bike trailer. Stay safe while riding in low-light conditions by adding extra visibility to your trailer. With 5 LED bulbs and 4 light modes, you’ll be easier to see for drivers and other cyclists, day or night. You’ll Love – - 5 LED bulbs for higher visibility - 4 light modes (flashing, constant, chasing, and random) - Compatible with any Burley trailer that has a Light Loop or Light Bracket - Includes clip-on light and 2 AA batteries

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 12 lumens. IPX7 water resistant rating. Composite matrix construction. E-bike compatible (6v input, 0.4w / 12v input 0.8w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm-long power cable included. 50 and 80mm mount spacing. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

3 LED tail light with helmet mount Versatility is the Blinky 3H’s middle name. You can mount it to your helmet with the included self-leveling helmet mount or attach it to your seat post or seat stay. No matter where you choose to mount it, its brilliant illumination will keep you visible on your evening bicycle adventures.

28 LED PB Power Array™ tail light 28 LED microchips make up the Grateful Red’s PB Power Array™. Its dazzlingly bright and the three modes give you safety options for day and night time biking. Mount it to your seat post or rear rack with the included brackets. -PB power array and reflector provide visibility for up to 1 mile -Steady, Superflash, and Courtesy flash modes -Ultra-compact case is weatherproof, lightweight, and durable -Rear rack and seat post mounts included -Up to 150 hours of run time on 2 AAA batteries (included) -85 grams

- 8 lumen safety tail light - Built in Li-Ion USB rechargable battery - 3 modes - 2 steady and 1 flashing setting - Multi fit rubber strap attachment - Low battery indicator

- 24 lumen LED - Built-in Li-Ion USB rechargeable battery - 1.5 ~ 6 hour run time per charge - Low battery, charging, and fully charged indicator - Includes USB charging cable - 3 modes (2 Steady and 1 Flashing) - Multi-fit rubber strap - Water resistant

This is the “Next Generation” of our compact and versatile fast-mounting bike lights. Their mission: to help cyclists boldly go where no cyclist has gone before. - High output surface mounted LED provides steady, Courtesy, and Superflash modes - FL1 tested run time: 4.5 hrs (steady – 5 lm), 7 hrs (Courtesy™ 1.5-4.5 lm) and up to 22 hrs (Superflash - 5 lm) - Side cut outs provide 270° of visibility - Dust & water resistance rated to IP54 standard - 270 mAh lithium polymer battery charges in 2 hours with micro USB cable (included) - Diminutive size and fast mounting rubber strap mounts to multiple mounting locations in seconds without tools - 25 grams

- High brightness 16 chip COB style LED light - 4 modes including 2 solid setting and 2 flash modes - USB rechargeable - cable included - Lumens: 30 - Mount: rubber strap

The KTV Drive+ Rear is a compact yet powerful rear light that ensures optimal visibility and safety on your rides. With a maximum output of 40 lumens, an impressive 45-hour runtime in Femto mode, and six different output modes, including Daytime Flash, this rear light provides reliable illumination. The unique design is compatible with aero and round seatposts, ensuring versatility for various bike setups. The light utilizes our Wide-Angle Optics lens design to provide 270° of visibility, and an integrated USB stick allows convenient cable-free recharging. Rigorously tested to IPX7 Waterproofing standards, it can withstand challenging weather conditions. - Max 40 lumens / 45-hour runtime in Femto mode - Max 40 lumens / 45-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Unique aero and round seatpost compatible design - Rigorously tested to IPX7 Waterproofing standards - Integrated USB stick for cable-free recharging - 400 mAh battery capacity

Topeak's RedLite Aura gives you 1 high-flux piranha LED and 2 super-bright red LEDs to provide superb visibility for cars approaching from the rear. It mounts quickly and easily to Topeak racks and seatposts, and the included coin batteries deliver up to 120 hours of run time.

65 lumen bicycle tail light The Superflash 65 brings a whole new level of versatility to battery powered tail lights. With four modes (High, Low, Courtesy™ and Superflash™) this tail light provides 65 lumens and 220° of visibility that will get you noticed day or night. - Cree XBD and high output surface mounted LEDs provide 65-lumen output with high, low, Courtesy, and Superflash modes - FL1 Tested - Run times: 40 hrs (high – 30 lm), 90 hrs (low – 7 lm), 45 hrs (Courtesy - 20-60 lm) and up to 130 hrs (Superflash - 65 lm) - Provides 220° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP64 standard - 2 AAA batteries (included) - Includes seat post and seat stay mounts and horizontal clip mount for multiple mounting options - 70 grams