- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
Getting your gear onto your rack isnt complete until youve secured it. This pair of super strong box-stitched 16 straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
Bar adapter that allows you to run RoundBar on StreamLine Towers.
Free up precious cargo space and keep your vehicle's interior clean with Yakima's Wheel Fork. It securely holds one wheel and swings down when not in use. Universal snap-arounds allow the Wheel Fork to fit round and square crossbars, while its security tabs help your wheel stay in place even if your quick release loosens. And it even features a clever anti-spin device to stabilize your wheel.
$43.00 - $48.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Yakima's Universal Mighty Mounts are a simple way to install Yakima accessories on your car's factory racks. The universal design fits almost all factory crossbars.
Yakima's LoadStop brackets prevent your loads from shifting side to side, without having to stuff a whole bunch of folded-up blankets onto your roof. FEATURES: - Carries ladders and lumber with sturdy L-shaped brackets - Safely holds loads by preventing lateral shifts with grippy ribbed surface - Holds thicker, taller loads with a higher vertical edge - Compatible with Yakima crossbars only - Works well when paired with Heavy Duty Straps (sold separately) - Set of 4 brackets
Thule's Wheel On solves the problem of where to put your front wheel when your bike is on your roof rack. Plus, it helps keep the inside of your car clean, too.
-Extends the Mini Skinny by 14" -Integrated 9mm Fork Mount -Retains 50% of usable crossbar space -Locking roof bar mounts -Basket comes fully assembled
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
The Boa is a short-tray bike mount that fits a wider range of crossbar spreads (32 to 50 inches). It has a rotating wheel tray and a sleek fork block with Yakima's Locking Long-Throw Skewer, which clears most fork safety tabs.
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Thule's Load Bars are a rock solid rack solution that come in 4 different widths to fit a huge range of vehicles.
- Securely carries both road and mountain bikes QR and thru-axles - Includes interchangeable inserts for QR axles (9mm) and thru axles (12mm, 15x100, 15x110) - Fat Bike compatible with optional accessory (Sold separately) - No frame contact means no damage to carbon fiber and custom paint jobs - Optional SKS locking package secures mount to vehicle, bike to mount (sold separately) - 1 bike, 40lbs capacity
$129.00 - $139.00
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
$129.95 - $139.95
The sleekest bike rack ever to rip down I-70. RockyMounts JetLine is a highly crafted fork mount with a low profile and streamlined aluminum head and tray, designed to fit Slotted Crossbars (RockyMounts Ouray, Thule AeroBlade, Yakima Whispbar and JetStream, Rhino Rack Vortex, factory bars from Audi, BMW, Mercedes, Mini, Volvo, VW), Thule Square Crossbars, and Yakima Round Crossbars. The JetLine will hold bikes with a quick-release front wheel and holds skinny road tires up to 2.7-inch mountain bike tires. The simple, long-throw quick-release function allows easy bike loading and unloading. JetLine is compatible with disc and standard brake systems. Lock rack to car and bike to rack with RockyMounts lock cores and keys (sold separately—requires a 2-pack).
RockyMounts' TieRod is a fantastically simple and elegant option for attaching a fork mount roof rack to your vehicle's factory crossbars. Not only will you be impressed with its easy, secure operation, you'll be thrilled with how well the rubber coated stainless steel straps perfectly hug the roof racks on your car. Plus, with RockyMounts locks (sold separately) you can lock the rack to your vehicle and your bike to the rack.
Transport your bicycle quickly and safely with this lockable fork mounted carrier. Not compatible with Thule Aeroblade bars. - Easy-to-use stainless-steel skewer with oversized lever makes for secure loading and unloading - High-strength nylon composite head - Ratcheting wheel strap quickly secures back wheel to tray - Versatile design compatible with standard 9mm axles and most disc brakes. - Carries bikes with wheelbases up to 48" and tire widths up to 2.6". Even works with high profile rims - Carries 1 bike - 1 One-Key lock cylinder (sold separately) locks the bike to carrier and carrier to rack - Fits Thule rack systems or other round bars - Factory rack compatible with Thule Ride-On Adapter (sold separately)
Yakima's Q Stretch Kit enables installation of a rack system on 2-door cars or cars with short roofs. It increases the stability of your rack and gear which means you can safely carry more equipment. It works with Q Towers.
No matter where you go, Yakima's Raptor Aero keeps your bike securely in place. It's especially convenient because no bike disassembly is required. You'll love this if you have bolt-on or hard-to-remove wheels. Plus, the Raptor's padded jaws hold most bicycles tight yet won't scratch the paint. The Raptor comes with two ratcheting wheel straps and fits most crossbars right out of the box.
The RockyMounts Tomahawk low-profile upright mount that's easy to use and even easier on your wallet. Fat-bike ready out of the box (up to 5" tires), and will hold all styles of bikes, road, mountain, cruiser, and childrens (20 - 29" wheels). Features: - No bike frame contact - simply ratchet the hook over the front wheel and secure the front/rear wheelstraps - Fat bike ready (up to 5" tires) out of the box. Includes two wheel strap extensions - Swingarm easily adjusts for driver side and passenger side installation - Mounts to all styles of crossbars - round, square, factory, aero - Holds all styles of bikes, 20 - 29" wheels (except those with front fenders) - New Easy-Load wheel straps make loading bikes easier than ever - Optional 2-pack locks (sold separately) lock rack to car and bike to rack
Telescoping-width SUP and surfboard carrier with built-in board protection and universal roof-rack compatibility. - Exclusive telescoping design delivers a custom fit for board widths up to 34" wide - Dual loading design allows for transport of up to two boards with maximum stability. - Strong, durable load straps with adjustable wrap-around padding on straps protect board from strap abrasion - Cushioned weather-resistant base padding protects both SUP and surfboards during transit - FlipFit bracket fits all Thule Rack Systems, round bars and most factory racks with single reversible mounting bracket
This standard J-style cradle delivers superior carrying performance and protection with its 4-touchpoint adjustable padding and rust resistant steel design. - Steel design with adjustable padding for carrying strength and kayak protection - Quick on/off hardware ensures fast installation and removal - Wide mouth J-profile offers easier loading and unloading - Optimally sized J-style carrier leaves roof space for other Thule accessories - AllSurface rust-resistant coating and hardware for longer product life - Carries 1 kayak and requires 1 person to load and unload - 1 to 4 carriers per vehicle - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak
The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
The Thule Circuit Fork Mount low-profile carrier is designed for those looking for security, convenience and aerodynamic styling. - AeroHead low-profile reinforced head combines aerodynamics, durability and style - SecureSkewer for fast loading and security w/ Thule’s One-Key lock cylinder (sold separately) - Tool-Free universal mounting makes it simple and easy to install - Integrated wheel cradle high-wall design provides protection and perfect fit beneath your wheel - Low profile aluminum tray made from corrosion-resistant aluminum to withstand the elements - Ratcheting wheel strap quickly secures back wheel to tray - Fits most factory supplied rack systems - Works with 15mm, 20mm and lefty forks with adapter (sold separately)
Thule's Traverse Short Roof Adapter enables installation of a rack system on 2-door cars or cars with short roofs. It increases the stability of your rack and gear which means you can safely carry more equipment. It's designed for use with the Traverse Foot System and Rapid Aero or square crossbars.
The FrontLoader is one of Yakima's most versatile upright mount roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It easily handles wheel sizes from 20 inches, to 700c road wheels, to large 29er mountain bike tires. Even if your bike has a unique frame design, there will be no problems carrying it because the FrontLoader holds the wheels and not the frame. Plus, it won't scratch your paint!
Versatile, adaptable, and super low-maintenance, the JayLow provides maximum loading and minimal fuss. Carry one boat in cradle position, or two boats in stacker position. Carry 1 boat in J-cradle position or 2 boats in vertical, stacker position - Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory, or aerodynamic bars - Adjust the upright position with the easy-to-use integrated cam lever - Folds flat when not in use - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lb or two boats with combined weight of 110 lbs or less - Minimum crossbar spreads of 24 inches or more
Yakima's SprocketRocket is the mount your prized possession deserves. This top-quality carrier features a quick release with an integrated adjuster knob and a sliding wheel tray, which accepts all tire sizes. Plus, the SprocketRocket has an automotive finish sure to complement your vehicle. You'll also appreciate that the wheel strap is double-sided for use on either side of your car.
Page 1 of 3 Next page