This item is currently not available.

Details

Eliminate dropped chains forever and more than double your chainring life with the new OneUp Components Low Direct Mount (S3/E-type). At only 20g the OneUp S3/E-type Chain Guide weighs less than a sip of water, and can save you money in less than a season.

FEATURES

• Install without removing your crank
• Single tool install and adjustment (Torx T25)
• Boost compatible
• Oval Compatible
• Stainless Steel hardware
• Includes 2 top guide pieces 1xBlack 1xGreen
• Includes 3 size range backplates

SPECS

SPECS

Weight: 20g
Capacity: 28-36T
Chainline: 5.5mm adjustment
Mount: S3/E-type
Material: Glass reinforced thermoplastic

GUIDE SETUP INSTRUCTIONS

1. Select correct backplate size based on front chainring

2. Install backplate and washers onto S3 mount using size specific holes, torque bolts to 3Nm. (NOTE: If your S3 mounting bolt protrudes beyond the frame mount please ensure it will will not collide with any frame components throughout all suspension travel)

3. With crankset and chain installed, use spacer shim block to measure clearance between back plate and chain

4. Determine the corresponding number of chainline shims required

5. Assemble top guide with spacers and tighten bolt to 3Nm